3d technology

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

12.12.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 12th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

05.12.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 5th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter - sold out

Training in the Independent Use of Laser Cutter - sold out

14.11.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, November 14th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

07.11.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, November 7th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

10.10.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, October 10th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

03.10.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, October 3rd, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

12.09.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 12th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

05.09.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 5th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

11.07.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, July 11th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

04.07.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, July 4th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

20.06.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 20th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

13.06.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 13th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

30.05.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, May 30th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

16.05.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, May 16th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

11.04.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, April 11th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

21.03.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, March 21st, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

07.03.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, March 7th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

14.02.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, February 14, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

31.01.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, January 31, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

10.01.2017 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, January 10, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

13.12.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 13, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

3-Dimension: From High Efficient Scanning to 3D Printing

3-Dimension: From High Efficient Scanning to 3D Printing

29.11.2016 | Performed by RPS

On Thursday, November 29, at 5 pm, a workshop of scanning with a high efficient optical scanner will be held in RogLab. The second part of the workshop, 3D printing with powder technology, will take place at the RPS Company two days later. .  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

22.11.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, November 22, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

08.11.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, November 8, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

25.10.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, October 25, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

11.10.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, October 11, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, between 12 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

20.09.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 20, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

30.08.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, August 30, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

28.06.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, June 23, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

14.06.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, June 14, from 5 pm to 8 pm. Special offer for members with 3D printer and laser cutter licence!  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

31.05.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, May 31, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

17.05.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, May 17, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

03.05.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, May 5, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

12.04.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, April 12, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

29.03.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, March 29, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

01.03.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, March 1, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

09.02.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, February 9, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

19.01.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, January 19, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays and Fridays between 4 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

08.12.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 8, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

24.11.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, November 24, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

"Double bill" Training in the Independent Use of Vinyl cutter and embroidery machine

10.11.2015 | Organised and performed by RogLab

A special "double bill" Training in the Independent Use of Vinyl cutter and Embroidery machine will be held on Tuesday, November 10. Training provides you with a licence for independent use of RogLab machinery at Open Days. Join us!  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

03.11.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, November 3, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

27.10.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 16, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

13.10.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, October 13, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

06.10.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, October 6, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

29.09.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 29, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

07.07.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, July 30, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

30.06.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, June 30, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

23.06.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 23, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

09.06.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, June 9, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

02.06.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, June 2, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D printer

Training in the Independent Use of 3D printer

26.05.2015 | Organised and performed by RogLab

We invite you for a Training in the Independent use of 3D printer, that will be held on Tuesday, May 26, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab 3D printers at Open Days.  » 

Training in the Independent Use of Vinyl Cutter and T-shirt Press

Training in the Independent Use of Vinyl Cutter and T-shirt Press

19.05.2015 | Organised and performed by RogLab

On Tuesday, May 19, from 5 pm to 7 pm, you can join us for the training programme in the independent use of Vinyl Cutter and T-shirt Press. With the training you will get the licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

05.05.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, May 5, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

21.04.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, April 21, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D printer

Training in the Independent Use of 3D printer

07.04.2015 | Organised and performed by RogLab

We invite you for a Training in the Independent use of 3D printer, that will be held on Tuesday, April 7, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab 3D printers at Open Days.  » 

FASHION, TECHNOLOGIES AND PHYSICAL DISABILITIES

FASHION, TECHNOLOGIES AND PHYSICAL DISABILITIES

03.04.2015 | Discussion and presentation of prototypes

On Friday, April 3, a discussion Fashion, technologies and physical disabilities will be held at the City Museum in Ljubljana at 6.00 PM, and the results of the one-month online working process and Ljubljana workshop will be publicly presented.  » 

INTERNATIONAL WORKSHOP DESIGN (DIS)ABILITY

INTERNATIONAL WORKSHOP DESIGN (DIS)ABILITY

30.03.2015 | In collaboration with Open Style Lab, MIT

The production centre RogLab from Ljubljana and Open Style Lab from the Massachusetts Institute of Technology (MIT) are organizing an international workshop, focused on design, disabilities and assistive technology. Ljubljana, March 30–April 3, 2015.  » 

"Double bill" Training in the Independent Use of Vinyl cutter and embroidery machine

24.03.2015 | Organised and performed by RogLab

Special training, special price. A "double bill" Training in the Independent Use of Vinyl cutter and Embroidery machine will be held on Tuesday, March 24. Training provides you with a licence for independent use of RogLab machinery at Open Days. Join us!  » 

“Crafty builders” 3D modellers

“Crafty builders” 3D modellers

04.03.2015 | In partnership with RAMPA Lab and CtrlArt 3D studio

In March a series of free 3D modelling workshops for youth will take place at RAMPA Lab under mentorship of CtrlArt experts. In June the most eager participants will develop their 3D-creations from virtual to physical objects at RogLab.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

03.03.2015 | Organised and performed by RogLab

Do it Yourself! We welcome you for a Training in the Independent Use of Laser cutter on Tuesday, March 3, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

International Workshop DESIGN (DIS)ABILITY

International Workshop DESIGN (DIS)ABILITY

25.02.2015 | Selected participants

We are happy to announce 10 selected participants who will take part in the DESIGN (DIS)ABILITY workshop, organized by the RogLab production center in Slovenia and Open Style Lab from the Massachusetts Institute of Technology (MIT).  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

17.02.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, February 17, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

10.02.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, February 10, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

International Workshop DESIGN (DIS)ABILITY

International Workshop DESIGN (DIS)ABILITY

09.02.2015 | Call for participants

RogLab and Open Style Lab from the Massachusetts Institute of Technology (MIT) are inviting designers and engineers to participate in DESIGN (DIS)ABILITY, an international collaborative workshop focused on design, disabilities and assistive technology.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

13.01.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, January 13, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

06.01.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, January 6, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

3-Dimension: From High Efficient Scanning to 3D Printing, part 2

3-Dimension: From High Efficient Scanning to 3D Printing, part 2

18.12.2014 | Performed by RPS

On Thursday, December 18, at 6 pm, the second part of the presentation 3-Dimension: From High Efficient Scanning to 3D printing, 3D printing with powder method, will take place in the Workroom of the RPS Company on Gerbičeva ulica in Ljubljana.  » 

Training In the Independent Use of Laser cutting and engraving Machine

Training In the Independent Use of Laser cutting and engraving Machine

09.12.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Laser Cutter! We welcome you at RogLab on Tuesday, December 9, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

3-Dimension: From High Efficient Scanning to 3D Printing

3-Dimension: From High Efficient Scanning to 3D Printing

04.12.2014 | Performed by RPS

On Thursday, December 4, at 6 pm, presentation of scanning with a high efficient optical scanner Noomeo will be held in RogLab. The second part of the presentation, 3D printing with powder technology, will take place in the workshop of the RPS Company.  » 

Training In The Independent Use of Laser Cutting and Engraving Machine

Training In The Independent Use of Laser Cutting and Engraving Machine

02.12.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Laser cutting and engraving Machine, at RogLab, on Tuesday, December 2, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of Embroidery Machine

Training In the Independent Use of Embroidery Machine

25.11.2014 | Organised and performed by RogLab

Join us for the training programme in the Independent Use of Embroidery Machine! We welcome you at RogLab on Tuesday, November 25, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Foil Cutter and T-shirt Press

Training in the Independent Use of Foil Cutter and T-shirt Press

18.11.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Foil Cutter and T-shirt Press! We welcome you at RogLab on Tuesday, November 18, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Images of Maribor

Images of Maribor

11.11.2014 | Workshop of Embroidery Postcards

On Tuesday, November 11, between 4 pm and 8 pm, you are invited to the Workshop of Embroidery Postcards that will be held in Graphic Arts Center Maribor. Due to the limited number of places you need to apply in advance.  » 

Training In the Independent Use of 3D Printer

Training In the Independent Use of 3D Printer

11.11.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of 3D printer, on Tuesday, November 11, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Exhibition

Exhibition "ROGLAB – THE FACTORY THAT IS MAKING ITSELF" in Maribor

06.11.2014 | Hosting exhibition enabled by DRNT and Narodni dom Maribor

On Thursday, November 6, at 6 pm you are cordially invited to Vetrinjski dvor in Maribor for the opening of RogLab exhibition. Exhibition will present selected prototypes that RogLab has developed in cooperation with its programme partners.  » 

Form - Volume - Detail, International Architectural Workshop

Form - Volume - Detail, International Architectural Workshop

03.11.2014 | International Architectural Workshop

RogLab kindly invites you to attend workshop in November by Seminar studio Jurij Sadar and New York City College of Technology - CUNY.  » 

Training In the Independent Use of CNC Milling Machine

Training In the Independent Use of CNC Milling Machine

28.10.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, October 28, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutting and Engraving Machine

Training in the Independent Use of Laser Cutting and Engraving Machine

21.10.2014 | Organised and performed by RogLab

Join us for additional training in the independent use of laser cutting and engraving machine! We welcome you at RogLab this Tuesday, October 21, from 5 pm to 7 pm. The training provides you with a license for independent use of RogLab machinery.  » 

3D Digital Modeling: Grasshopper

3D Digital Modeling: Grasshopper

16.10.2014 | Organised by RogLab, performed by POTI-POTI.org

On Thursday, October 16, will be held first level training in 3D Modeling with Grasshopper Software. Second level training wil be held on Thursday, October 23, at the same time. You are cordially invited to apply!  » 

Training in the Independent Use of Laser Cutting and Engraving Machine

Training in the Independent Use of Laser Cutting and Engraving Machine

14.10.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of laser cutting and engraving machine! We welcome you at RogLab on Tuesday, October 14, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery.  » 

Training In the Independent Use of 3D Printer

Training In the Independent Use of 3D Printer

30.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of 3D printer. We welcome you at RogLab on Tuesday, September 30, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of Foil Cutter and T-shirt Press

Training In the Independent Use of Foil Cutter and T-shirt Press

23.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Foil cutter and T-shirt press! We welcome you at RogLab on Tuesday, September 23, from 5 pm to 8 pm. The training provides you with a license for independent use of machinery at Open Days.  » 

Training In the Independent Use of CNC Milling Machine

Training In the Independent Use of CNC Milling Machine

09.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, September 9, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of Embroidery Machine

Training In the Independent Use of Embroidery Machine

02.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Embroidery Machine! We welcome you at RogLab on Tuesday, September 2, from 4 pm to 7 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

3D Digital Modeling: Rhinoceros

3D Digital Modeling: Rhinoceros

28.08.2014 | Organised by RogLab, Performed by POTI-POTI.org

Second level training will be held on Thursday, August 28. You are cordially invited to apply!  » 

Training in the Independent Use of Laser Cutting and Engraviing Machine

Training in the Independent Use of Laser Cutting and Engraviing Machine

26.08.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of laser cutter! We welcome you at RogLab on Tuesday, August 26, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

3D digital modeling with CAD software Sketchup: level 1

3D digital modeling with CAD software Sketchup: level 1

19.06.2014 | Organised by RogLab, Performed by POTI-POTI.org

Training for fast 3D modeling with CAD software Sketchup, on Thursday, June 19, from 4pm to 8pm. You are cordially invited to apply!  » 

Training in the independent use of Embroidery Machine

Training in the independent use of Embroidery Machine

10.06.2014 | Organised amd performed by RogLab

We welcome you at the training in the independent use of Embroidery Machine on Tuesday, June 10, from 5 pm to 8 pm. Apply now!  » 

Training in the independent use of laser cutting and engraving machine

Training in the independent use of laser cutting and engraving machine

03.06.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of laser cutter! We welcome you at RogLab on Tuesday, June 3, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training in the independent use of 3D printer

Training in the independent use of 3D printer

27.05.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of 3D printer on Tuesday, May 27, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

3D digital modeling with CAD software Sketchup - Level 2

3D digital modeling with CAD software Sketchup - Level 2

22.05.2014 | Organised by RogLab, Performed by POTI-POTI.org

Training for fast 3D modeling with CAD (Computer Aided Design) software Sketchup will take place in RogLab. Second level training will be held ob Thursday, May 22, from 4pm to 8pm. You are cordially invited to apply!  » 

RogLab at Mini Maker Faire in Trieste

RogLab at Mini Maker Faire in Trieste

17.05.2014

On Saturday, May 17, the first Trieste Mini Maker Faire will be held in Miramare, Trieste. RogLab will be one of the participating makers at the event. Join us!  » 

3D digital modeling with CAD software Sketchup by POTI-POTI.org.

3D digital modeling with CAD software Sketchup by POTI-POTI.org.

15.05.2014 | Organised by RogLab, Performed by POTI-POTI.org

We are glad to announce new trainings in 3D modeling. Trainings are conducted by POTI-POTI.org in English language with constant presence of Slovenian assistant.  » 

Training in the independent use of Laser cutting and engraving machine

Training in the independent use of Laser cutting and engraving machine

08.04.2014 | Organised and performed by RogLab

Join us in the training programme for independent use of laser cutting and engraving machine! We welcome you at RogLab on Tuesday, April 8, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training in the independent use of embroidery machine

Training in the independent use of embroidery machine

01.04.2014 | Organised and performed by RogLab

We welcome you on a training in the independent use of embroidery machine on Tuesday, April 1, from 5 pm to 8 pm. Apply now!  » 

Training in the independent use of CNC Milling Machine

Training in the independent use of CNC Milling Machine

25.03.2014 | Organised and performed by RogLab

Join us in the training programme for independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, March 25, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Assembling PrusaI3 with POTI-POTI.org.

Assembling PrusaI3 with POTI-POTI.org.

18.03.2014 | In collaboration with POTI-POTI.org

In March, we assembled a 3D printer Prusal3 with our partners POTI-POTI.org.  » 

Carlos Bayod Lucini: Lucida 3D Scanner

Carlos Bayod Lucini: Lucida 3D Scanner

06.03.2014 | Lecture and debate

On Thursday, 6 March, at 6 pm you are cordially invited to the International Centre of Graphic Arts for a lecture of Carlos Bayod Lucini from Factum Arte about Lucida 3D Scanner, designed to record the surface of paintings and relief objects.  » 

Training in the independent use of Foil Cutter and T-shirt press

Training in the independent use of Foil Cutter and T-shirt press

18.02.2014 | Organised and performed by RogLab

Join us in the training programme for independent use of foil cutter on Tuesday, 18 February, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

"Internet of Things"

06.02.2014 | Lecture and debate

Join us on Thursday, 6 February, at 6 pm for a lecture and a debate with Rabindranath Andujar and Igor Trupina from POTI-POTI.org about "Internet of Things".  » 

ROGLAB – THE FACTORY THAT IS MAKING ITSELF

ROGLAB – THE FACTORY THAT IS MAKING ITSELF

19.12.2013 | Exhibition of prototypes

On Thursday, 19 December, at 6 pm, we are opening the exhibition at Breg 22 in the centre of Ljubljana. The exhibition will present selected prototypes that RogLab has developed in cooperation with its programme partners. Warmly welcome!  » 

GRAB.ROG.LAND - MonoMaterialisation of Rog

GRAB.ROG.LAND - MonoMaterialisation of Rog

13.11.2013 | Performed by University of Nova Gorica School of Arts - project Adriart

13-15 November RogLab becomes a research platform for international group of students and their mentors to develop a dice game for culture-management of real-estate.  » 

Contemporary Production Models and Institutions in the Creative Field

Contemporary Production Models and Institutions in the Creative Field

29.08.2013 | Public debate in the frame of the 7 u3

Join us on Thursday, August 29, at 6 pm for a public debate Contemporary Production Models and Institutions in the Creative Field. The debate will happen at the Museum of Contemporary Art Metelkova in Ljubljana.  » 

Open Day

Open Day

Every Monday and Wednesday between 4 pm and 8 pm RogLab opens its doors. At the Open Days you can see what RogLab has to offer, while users can use RogLab machinery with RogLab technical support.  » 

From high resolution 3D scanning to 3D printing

From high resolution 3D scanning to 3D printing

06.06.2013 | Performed by RPS

On Thursday, June 6th, between 1 pm and 4 pm, RogLab will host a presentation of high resolution scanning with a Noomeo optical scanner. The second part of the presentation, 3D-printing with powder technology, will take place at the RPS workshop.  » 

Artist's book in 3d-print

Artist's book in 3d-print

24.05.2013 | Carried out by the International Centre of Graphic Arts and RogLab

We invite you to an experiment and research into the field of artist’s books linked to new printing technologies. The two part workshop is aimed at primary school children and youth.  » 

Couture Digitale Textile Electronics Workshop Impressions

Couture Digitale Textile Electronics Workshop Impressions

13.05.2013 | Organised by FabLab Nürnberg

Check some Couture Digitale Textile Electronics Workshop Impressions, where participants created their own piece of electronic fashion clothes. The menthors of workshop were Michael and Chris from FabLab Nürnberg.  » 

The “Couture Digitale” Textile Electronics Workshop

The “Couture Digitale” Textile Electronics Workshop

10.05.2013 | Organised by FabLab Nürnberg

Welcome to the “Couture Digitale” Textile Electronics Workshop, where you create your own piece of electronic fashion in just four hours. The workshop will take place at RogLab on 10th and 11th May with mentors Michael and Chris from FabLab Nürnberg.  » 

Presentation of the 3D scanning process

Presentation of the 3D scanning process

26.04.2013 | Performed by FRI

Welcome to the presentation of the 3D scanning process on Friday, 26th April, from 1 pm till 3 pm at RogLab. The presentation will be performed by the Faculty of Computer and Information Science.  » 

Educational workshop: from a 3D model to the final product via a cast

Educational workshop: from a 3D model to the final product via a cast

18.04.2013 | Organised by RPS

At the workshop which will take place on Tuesday, 23rd April, between 11 am and 2 pm, RPS experts will present the process of creating a promotional table with the use of an epoxy resin cast. Workshop is free of charge, application: info@roglab.si.  » 

Workshop: MULTITUDE MANIFESTATIONS OF ROG

Workshop: MULTITUDE MANIFESTATIONS OF ROG

07.01.2013

In cooperation with the School of Arts at the University of Nova Gorica and the ADRIART project, we continue with the international workshop on three-dimensional printing with environment-specific interactions entitled Multitude Manifestations of Rog.  » 

THE ROGLAB MOOD LAMP CHALLENGE

THE ROGLAB MOOD LAMP CHALLENGE

16.11.2012

Can you design and build your own RogLab Mood Lamp (a stunning tabletop LED lamp with programmable light patterns) in just a few hours? YES, YOU CAN! Join us at the workshop on Friday, November 30.  » 

Lets build a 3d-printer together!

Lets build a 3d-printer together!

31.10.2012

On Tuesday, November 6, 2012 from 10 a.m. till 1 p.m., we invite you to attend the continuation of the workshop for building a 3D-printer Co-creator. Welcome!  » 

roglab opening impressions

roglab opening impressions

16.10.2012

Take a look at some impressions from RogLab's opening event!  » 

Open-door days to the 3D-Workshop

Open-door days to the 3D-Workshop

15.10.2012

For the first month of RogLab's operation, we are offering open-door days to the 3D-workshop. Make a reservation!  » 

one more day until roglab opening

one more day until roglab opening

08.10.2012

RogLab – the pilot project for the future Rog Centre – will be launched on October 12, 2012 at the Petkovškovo Riverbank in Ljubljana, in the immediate vicinity of the former Rog factory.  » 

RogLab Opening - Multiple Circulation

RogLab Opening - Multiple Circulation

08.10.2012

On Friday, October 12, 2012 at 7 p.m., we cordially invite you to attend the opening of the RogLab. Come, it will be fun!  » 

3D WORKSHOP

3D WORKSHOP

Apply here!  »