training

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

12.12.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 12th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

05.12.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 5th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

21.11.2017 | ORGANISED AND PERFORMED BY ROGLAB

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, November 21st, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter - sold out

Training in the Independent Use of Laser Cutter - sold out

14.11.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, November 14th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

07.11.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, November 7th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

17.10.2017 | ORGANISED AND PERFORMED BY ROGLAB

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, October 17th, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

10.10.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, October 10th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

03.10.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, October 3rd, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

19.09.2017 | ORGANISED AND PERFORMED BY ROGLAB

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, September 19th, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

12.09.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 12th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

05.09.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 5th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

22.08.2017 | ORGANISED AND PERFORMED BY ROGLAB

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, June 6th, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

11.07.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, July 11th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

04.07.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, July 4th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

20.06.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 20th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

13.06.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 13th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

06.06.2017 | ORGANISED AND PERFORMED BY ROGLAB

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, June 6th, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

30.05.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, May 30th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

16.05.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, May 16th, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

09.05.2017 | ORGANISED AND PERFORMED BY ROGLAB

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, May 9th, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

11.04.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, April 11th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

21.03.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, March 21st, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

14.03.2017 | ORGANISED AND PERFORMED BY ROGLAB

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, February 7th, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

07.03.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, March 7th, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

14.02.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, February 14, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutter

Training in the Independent Use of Laser Cutter

31.01.2017 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, January 31, from 5 pm to 8 pm, where the training programme in the independent use of Laser Cutter will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

10.01.2017 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, January 10, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

13.12.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 13, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

22.11.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, November 22, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

08.11.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, November 8, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

25.10.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, October 25, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

11.10.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, October 11, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, between 12 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

20.09.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 20, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

30.08.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, August 30, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

28.06.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, June 23, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

14.06.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, June 14, from 5 pm to 8 pm. Special offer for members with 3D printer and laser cutter licence!  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

31.05.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, May 31, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

17.05.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, May 17, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

03.05.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, May 5, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

12.04.2016 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, April 12, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

RogLab and partners at Cultural Bazaar

RogLab and partners at Cultural Bazaar

31.03.2016 | In Cooperation with Rampa Lab and Ctrl Art Studio

You are warmly invited to join us on Thursday, 31 March between 10.30 and 12.30 am for a training session on new production technologies, which will take place in M2 Hall in Cankarjev dom.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

29.03.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, March 29, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

01.03.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, March 1, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays, Thursdays and Fridays between 12 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

09.02.2016 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, February 9, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

19.01.2016 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, January 19, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays, Wednesdays and Fridays between 4 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

08.12.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, December 8, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

24.11.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, November 24, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

"Double bill" Training in the Independent Use of Vinyl cutter and embroidery machine

10.11.2015 | Organised and performed by RogLab

A special "double bill" Training in the Independent Use of Vinyl cutter and Embroidery machine will be held on Tuesday, November 10. Training provides you with a licence for independent use of RogLab machinery at Open Days. Join us!  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

03.11.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, November 3, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

27.10.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 16, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

13.10.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, October 13, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

06.10.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, October 6, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

29.09.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, September 29, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

07.07.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, July 30, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

30.06.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, June 30, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

23.06.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, June 23, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

09.06.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, June 9, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

02.06.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, June 2, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D printer

Training in the Independent Use of 3D printer

26.05.2015 | Organised and performed by RogLab

We invite you for a Training in the Independent use of 3D printer, that will be held on Tuesday, May 26, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab 3D printers at Open Days.  » 

Training in the Independent Use of Vinyl Cutter and T-shirt Press

Training in the Independent Use of Vinyl Cutter and T-shirt Press

19.05.2015 | Organised and performed by RogLab

On Tuesday, May 19, from 5 pm to 7 pm, you can join us for the training programme in the independent use of Vinyl Cutter and T-shirt Press. With the training you will get the licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

05.05.2015 | Organised and performed by RogLab

Do it Yourself! Join us for a Training in the Independent Use of Laser cutter on Tuesday, May 5, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

21.04.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, April 21, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D printer

Training in the Independent Use of 3D printer

07.04.2015 | Organised and performed by RogLab

We invite you for a Training in the Independent use of 3D printer, that will be held on Tuesday, April 7, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab 3D printers at Open Days.  » 

"Double bill" Training in the Independent Use of Vinyl cutter and embroidery machine

24.03.2015 | Organised and performed by RogLab

Special training, special price. A "double bill" Training in the Independent Use of Vinyl cutter and Embroidery machine will be held on Tuesday, March 24. Training provides you with a licence for independent use of RogLab machinery at Open Days. Join us!  » 

“Crafty builders” 3D modellers

“Crafty builders” 3D modellers

04.03.2015 | In partnership with RAMPA Lab and CtrlArt 3D studio

In March a series of free 3D modelling workshops for youth will take place at RAMPA Lab under mentorship of CtrlArt experts. In June the most eager participants will develop their 3D-creations from virtual to physical objects at RogLab.  » 

Training in the Independent Use of Laser cutter

Training in the Independent Use of Laser cutter

03.03.2015 | Organised and performed by RogLab

Do it Yourself! We welcome you for a Training in the Independent Use of Laser cutter on Tuesday, March 3, from 5 pm to 8 pm. With a license gained, you can use RogLab machinery at Open Days, on Mondays and Wednesdays, between 4 pm and 8 pm.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

17.02.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, February 17, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

10.02.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, February 10, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of 3D Printer

Training in the Independent Use of 3D Printer

13.01.2015 | Organised and performed by RogLab

We welcome you at RogLab on Tuesday, January 13, from 5 pm to 8 pm, where the training programme in the independent use of 3D Printer will be held. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

06.01.2015 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, January 6, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of Laser cutting and engraving Machine

Training In the Independent Use of Laser cutting and engraving Machine

09.12.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Laser Cutter! We welcome you at RogLab on Tuesday, December 9, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training In The Independent Use of Laser Cutting and Engraving Machine

Training In The Independent Use of Laser Cutting and Engraving Machine

02.12.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Laser cutting and engraving Machine, at RogLab, on Tuesday, December 2, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of Embroidery Machine

Training In the Independent Use of Embroidery Machine

25.11.2014 | Organised and performed by RogLab

Join us for the training programme in the Independent Use of Embroidery Machine! We welcome you at RogLab on Tuesday, November 25, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Foil Cutter and T-shirt Press

Training in the Independent Use of Foil Cutter and T-shirt Press

18.11.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Foil Cutter and T-shirt Press! We welcome you at RogLab on Tuesday, November 18, from 5 pm to 7 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of 3D Printer

Training In the Independent Use of 3D Printer

11.11.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of 3D printer, on Tuesday, November 11, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of CNC Milling Machine

Training In the Independent Use of CNC Milling Machine

28.10.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, October 28, from 5 pm to 8 pm. The training provides you with a licence for independent use of RogLab machinery at Open Days.  » 

Training in the Independent Use of Laser Cutting and Engraving Machine

Training in the Independent Use of Laser Cutting and Engraving Machine

21.10.2014 | Organised and performed by RogLab

Join us for additional training in the independent use of laser cutting and engraving machine! We welcome you at RogLab this Tuesday, October 21, from 5 pm to 7 pm. The training provides you with a license for independent use of RogLab machinery.  » 

3D Digital Modeling: Grasshopper

3D Digital Modeling: Grasshopper

16.10.2014 | Organised by RogLab, performed by POTI-POTI.org

On Thursday, October 16, will be held first level training in 3D Modeling with Grasshopper Software. Second level training wil be held on Thursday, October 23, at the same time. You are cordially invited to apply!  » 

Training in the Independent Use of Laser Cutting and Engraving Machine

Training in the Independent Use of Laser Cutting and Engraving Machine

14.10.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of laser cutting and engraving machine! We welcome you at RogLab on Tuesday, October 14, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery.  » 

Training In the Independent Use of 3D Printer

Training In the Independent Use of 3D Printer

30.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of 3D printer. We welcome you at RogLab on Tuesday, September 30, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of Foil Cutter and T-shirt Press

Training In the Independent Use of Foil Cutter and T-shirt Press

23.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Foil cutter and T-shirt press! We welcome you at RogLab on Tuesday, September 23, from 5 pm to 8 pm. The training provides you with a license for independent use of machinery at Open Days.  » 

Training In the Independent Use of CNC Milling Machine

Training In the Independent Use of CNC Milling Machine

09.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, September 9, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training In the Independent Use of Embroidery Machine

Training In the Independent Use of Embroidery Machine

02.09.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of Embroidery Machine! We welcome you at RogLab on Tuesday, September 2, from 4 pm to 7 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

3D Digital Modeling: Rhinoceros

3D Digital Modeling: Rhinoceros

28.08.2014 | Organised by RogLab, Performed by POTI-POTI.org

Second level training will be held on Thursday, August 28. You are cordially invited to apply!  » 

Training in the Independent Use of Laser Cutting and Engraviing Machine

Training in the Independent Use of Laser Cutting and Engraviing Machine

26.08.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of laser cutter! We welcome you at RogLab on Tuesday, August 26, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training in the independent use of CNC Milling Machine

Training in the independent use of CNC Milling Machine

24.06.2014 | Organised and performed by RogLab

We welcome you at the training in the independent use of CNC Milling Machine on Tuesday, June 24, from 5 pm to 8 pm. Apply now!  » 

3D digital modeling with CAD software Sketchup: level 1

3D digital modeling with CAD software Sketchup: level 1

19.06.2014 | Organised by RogLab, Performed by POTI-POTI.org

Training for fast 3D modeling with CAD software Sketchup, on Thursday, June 19, from 4pm to 8pm. You are cordially invited to apply!  » 

Training in the independent use of Embroidery Machine

Training in the independent use of Embroidery Machine

10.06.2014 | Organised amd performed by RogLab

We welcome you at the training in the independent use of Embroidery Machine on Tuesday, June 10, from 5 pm to 8 pm. Apply now!  » 

Training in the independent use of laser cutting and engraving machine

Training in the independent use of laser cutting and engraving machine

03.06.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of laser cutter! We welcome you at RogLab on Tuesday, June 3, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training in the independent use of 3D printer

Training in the independent use of 3D printer

27.05.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of 3D printer on Tuesday, May 27, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

3D digital modeling with CAD software Sketchup - Level 2

3D digital modeling with CAD software Sketchup - Level 2

22.05.2014 | Organised by RogLab, Performed by POTI-POTI.org

Training for fast 3D modeling with CAD (Computer Aided Design) software Sketchup will take place in RogLab. Second level training will be held ob Thursday, May 22, from 4pm to 8pm. You are cordially invited to apply!  » 

3D digital modeling with CAD software Sketchup by POTI-POTI.org.

3D digital modeling with CAD software Sketchup by POTI-POTI.org.

15.05.2014 | Organised by RogLab, Performed by POTI-POTI.org

We are glad to announce new trainings in 3D modeling. Trainings are conducted by POTI-POTI.org in English language with constant presence of Slovenian assistant.  » 

Training in the Independent Use of CNC Milling Machine

Training in the Independent Use of CNC Milling Machine

13.05.2014 | Organised and performed by RogLab

Join us for the training programme in the independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, May 13, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

training in the independent use of Foil Cutter and T-shirt press

training in the independent use of Foil Cutter and T-shirt press

15.04.2014 | Organised and performed by RogLab

Join us in the the training programme for independent use of foil cutter and T-shirt press! We welcome you at RogLab on Tuesday, April 15, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training in the independent use of Laser cutting and engraving machine

Training in the independent use of Laser cutting and engraving machine

08.04.2014 | Organised and performed by RogLab

Join us in the training programme for independent use of laser cutting and engraving machine! We welcome you at RogLab on Tuesday, April 8, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training in the independent use of embroidery machine

Training in the independent use of embroidery machine

01.04.2014 | Organised and performed by RogLab

We welcome you on a training in the independent use of embroidery machine on Tuesday, April 1, from 5 pm to 8 pm. Apply now!  » 

Training in the independent use of CNC Milling Machine

Training in the independent use of CNC Milling Machine

25.03.2014 | Organised and performed by RogLab

Join us in the training programme for independent use of CNC Milling Machine! We welcome you at RogLab on Tuesday, March 25, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

Training in the independent use of Foil Cutter and T-shirt press

Training in the independent use of Foil Cutter and T-shirt press

18.02.2014 | Organised and performed by RogLab

Join us in the training programme for independent use of foil cutter on Tuesday, 18 February, from 5 pm to 8 pm. The training provides you with a license for independent use of RogLab machinery at Open Days.  » 

3D WORKSHOP

3D WORKSHOP

Apply here!  »